HeroMachine Character Portrait Creator - Topic: Kaylin's Tutorials

Kaylin88100 on Kaylin's Tutorials

Mon, 06 May 2013 14:59:02 -0600

The way to do a background is to make it separately from the characters and then load it first, with the figures loading on top. It's probably best if you finish each "layer" of character or background separately, and then don't do too much tweaking once you've put them together. Also, there is a glitch that means if you add a new load on top of an existing character, the bottom layer of the new character is layer 1, and the old character gets pushed into negative numbers, which is mildly annoying as you can't move anything down a layer below 1. All you can do is move things up, which thankfully seems to work fine.

WMDBASSPLAYER on Kaylin's Tutorials

Sun, 07 Apr 2013 08:28:51 -0600

Kaylin, I just saw your group shot tutorial and I'm going to give it a try. I created 10 themed characters I would love to group and though it sounds like it requires a lot of patience and time, your method seems like the way to go. The 2 trios I made I did one character at a time and kept shifting back & forth between them. Acchhh, what a headache! One thing I'm not sure of; do you save after each character added? Also, it seems to not work if there is a background, (I edited this post after a little experimenting). Assuming the first character was the very bottom layer, I tried to remove the background items from the second so I could see the first character, but nothing happened.

Hammerknight on Kaylin's Tutorials

Sun, 14 Oct 2012 08:04:00 -0600

Good advice all around. I always take my characters to Paint.net and group them there, I guess I'm to lazy to do it the other way.

The Atomic Punk on Kaylin's Tutorials

Sat, 13 Oct 2012 21:41:22 -0600

When I create groupshots, I typically create one character at a time then save the text. I open the main character / centerpiece first. Before I load the second character, I manually go into the text and make the adjustments to the X coordinates. For instance, adding or subtracting 240 pixels depending on whether I want the other character to stand to the left or the right.

This takes a little patience as you have to do it to every single Item. However, I find it easier. As an added bonus, I learned how to manually tweak large pictures by editing their attributes directly in the text. This is helpful when you have a high number of layers, patterns, and masking. HeroMachine can bog down, sometimes even lock up. And yes, definitely remember to save your creations as text!

Vampyrist on Kaylin's Tutorials

Sat, 13 Oct 2012 20:04:19 -0600

Wow! Nice tutorial. I would have never thought of doing it like that.

Weilyn on Kaylin's Tutorials

Fri, 12 Oct 2012 14:18:54 -0600

Awesome! I've been wondering about that. Working with two characters on the screen at the same time is a pain

Thank you very much!

Kaylin88100 on Kaylin's Tutorials

Wed, 10 Oct 2012 10:45:23 -0600

OK, here's a tutorial on how to create group shots on HM3.
[spoiler]
First, you need to create all the members of your group as separate HeroMachine saves. At this stage, just leave them all in the default position so you can see them. We'll move them later. As an example, I'm going to use 3 of the Template characters in a group shot: Female Fantasy Warrior, Male Fantasy Warrior and Princess 2.

I've decided I want Female Fantasy Warrior (FFW) in the center of the trio, so I just save her and leave her as she is. Male Fantasy Warrior (MFW) needs to be on the left, so I need to move every item in that character over to the left. Most people's instinct would probably be to move "All Items", but that doesn't work. What you need to do instead is to move them in groups. Select a Body item, like the chestplate, and then select the "Body" option to group all the Body items. Now you can move them using the buttons and they should all move together.

Do the same for Head, FootRight, HandRight and any other categories, like Companions. Careful, though: some items overlap! For example, ItemRight is in Body and HandRight, so if you have any ItemRight objects, like MFW's shield, you'll need to select ItemRight and move it the same amount the other way, before moving HandRight. Neckwear is in Body and Head.

I've moved MFW over so you can only just see him at the side of the screen. Now I can save him like that and do the same with Princess 2.

I've moved Princess 2 the same amount the opposite way, using the same technique. I think a good distance is about 240 pixels, which you can get by selecting the 20 option and moving 12 times.

Now I have my characters saved in the correct position, I need to put them together. I've got Princess 2 loaded at the moment, because I just finished moving her. Now I'll add MFW. On the "Load" screen, look at the bottom of the box, where it asks you if you want to keep the currently loaded items. This means "do you want to switch from the character you've got right now, to the one you're loading, or do you want to have them both loaded?" Normally you probably want to switch, but for a group shot we need them together, so select the box and make sure it has a cross in it.

Now you should have both the characters on the screen. Load up your third character the same way, making sure the box is checked.

I chose to load up my middle character last, because she needs to be at the front. When you load two characters together, the new one loads on top of the current one. Make sure you start from the back and work forwards, or you'll have a lot of work to do fixing it.

At the moment, I can only really see one of my characters, and I need to check that the other two are alright. At the bottom of the screen, underneath their feet, there is a toolbar that allows you to change the display mode. Selecting the widescreen option removes all the toolbars and centers your characters, so you can see all of them.

This is what it looks like. Now I can see all 3 of the characters side-by-side. I must have gone slightly wrong somewhere, though, because the outer two are missing a hand each! Oh well. You'll probably do better. To leave widescreen and go back to the normal view, just click on anything.

Don't forget to create a record of your awesome tutorial-following skills! You can either take a screenshot in widescreen view, or select one of the Widescreen options when you Export the image. Also, remember to save!
[/spoiler]

Kaylin88100 on Kaylin's Tutorials

Wed, 29 Aug 2012 08:11:07 -0600

Thanks Kaldath!

Kaldath on Kaylin's Tutorials

Wed, 29 Aug 2012 08:08:33 -0600

Jeff Made a post about this Last week in the How to post your Character thread, here's the link.

http://www.heromachine.com/for.....ter/#p9634

I haven't tried it myself yet, so I hope this helps get your text files posted

Kaylin88100 on Kaylin's Tutorials

Wed, 29 Aug 2012 04:43:13 -0600

I don't know what to do about that...I can't do it either! The reason it doesn't work as a simple copy-and-paste is that the text contains tags, which are then removed by the forum, rendering the text useless. So that bit isn't you. I suggest posting the text on another website and providing a link, as a temporary work-around until someone (not me!) figures it out.

djuby on Kaylin's Tutorials

Wed, 29 Aug 2012 03:54:04 -0600

Ok. So I have a stripped down pose (jpg), and the text version (which I checked and it works) saved as a Word doc. It seems that while I can post the picture, and it appears as though I am posting the doc file, when the upload is complete the doc file is missing. I tried cutting and pasting, but then I seem to have a very long post with a ton of text that when cut and pasted into the alpha does not work. I know it's me.

Kaylin88100 on Kaylin's Tutorials

Tue, 28 Aug 2012 05:39:06 -0600

How to load from text:
[spoiler]There's not much point having all your characters saved as text files if you just leave them there and don't ever use them. So here's how to get them back onto the program. First, open the folder where you put the text file. If you put it in a sensible place, clearly labelled as "Heromachine text saves" or something similar, this bit should be easy.

Find the one you want, and open it. Again, easy as long as you named it properly. Select all the text again - if you miss any, it won't work.

Copy it and open up HeroMachine. Click the "Load" button just above the "Save" one. You are (hopefully) now looking at a list of all the characters you have saved on the program.

There are three tabs this time. You are on the tab "Your Saves". Click on the "Text" tab. In case you didn't know, the "Templates" tab contains a few example characters made by various HM'ers and sent to Jeff, who added them to the program. One of them is the Male Fantasy Warrior I'm using for this tutorial, because I can't be bothered to dig out one of my own!

Now paste the text into the blank box. Click "OK" and your character should load.

If it doesn't, that probably means at some point you failed to copy the text properly. Go back and try again. If your character does load, however, well done! You have successfully followed my instructions. A final hint: You can also use this method to transfer saved characters from one computer to another via e-mail, etc. Happy HM-ing![/spoiler]

Kaylin88100 on Kaylin's Tutorials

Tue, 28 Aug 2012 05:29:27 -0600

Text saving tutorial:
[spoiler]First, load up the character you want to save as text. I'll use this one, from the Templates, as an example.

Click the "Save" button, like you would to save it normally. But here's where it starts getting different. At the top of the Save box there are two tabs. You're on the "Your Saves" tab, and it's showing all the characters you have saved on the program. What you need to do now is click the other tab, which says "Text".

Something that looks like this ^ should come up. Select all the text - it's very important that you don't miss any. It helps if you know a keyboard shortcut for this (it's Ctrl+A on a PC).

Copy the text, and paste it into a text editing program, like Notepad or Word. I prefer Notepad.

Save the file to your computer, in a sensible place. If you have a folder for all your HeroMachine characters' images, I suggest having a folder in that one called "Text Saves".

Finally, give it a name so you'll be able to tell which one it is when you want it again. Done![/spoiler]

Kaylin88100 on Kaylin's Tutorials

Sun, 26 Aug 2012 14:36:17 -0600

OK, I've updated the female tutorial with text instructions like I did for the other one.

Hammerknight on Kaylin's Tutorials

Thu, 09 Aug 2012 17:54:55 -0600

Harlequin said

Hmmm very hmmm.

Very similar my tutorial what i made in the old forum. Hmmm. Hmmm.
[spoiler][/spoiler]

They are close, but we all learn from each other. I haven't done a tutorial for a while so I'm glad to see other people are making the effort.